Download

ManualsBrandsUnbranded ManualsAutomotive AccessoriesOBD II Car Head Up Display

Menu Parameters Adjustment Range Explanation Default

0 Speed 50-150 Adjustment Range 50%-%150. 102

1 Rotational Speed 50-150 Adjustment Range 50%-%150. 117

2 Fuel Consumption 50-150 Adjustment Range 50%-%150. 100

3 Rotational Speed Alarm 10-75 Adjustment Range 1000-7500 r. 50

4 Shift Reminder 0-75 Adjustment Range 1000-7500 r. 45

5 Single/Four Stage Alarm 0-1

0 is a manual mode and 1 is the four-stage

alarm value (60, 80, 100, 120km/h).

6 Single Stage Alarm 30-250 Setting range is 30km/h-250km/h. 112

7 Display Mode 0-3

0 is an automatic mode: show all with speed

under 80km/h; show high-speed mode with

above 80km/h. 1 show all information, 2 is

high-speed mode, only display speed and

fuel consumption,3 is use voltage to control

power on/off of HUD(only use for gas-

electric hybrid)

8 Brightness Adjustment 0-2

0 is the automatic adjustment; 1 is the darkest

and 2 is the brightest.

9 Fuel Consumption Unit 0-2 0 is not a display, 1 is L/H, 2 is L/100km. 2

10 Speed Unit 0-2 0 is RPM, 1 is KM, 2 is MPH. 1

11 Water Temperature Unit 0-2

0 is to display water temperature, 1 is °C, 2 is

°F.

12 Mileage Unit 0-1 0 is KMH, 1 is MPH. 0

Reference Fuel

Consumption

10-500 Vehicle fuel consumption. 80

14 Air Displacement Setting 0-100

0 means the vehicle has the airflow meter; 1

means the reference fuel consumption. 2, 3,

…,100 means vehicle emission is 0.2L, 0.3L,

…,10L respectively.

15 Start Reference Voltage 110-150

This is the auto power on and off voltage for

the HUD. There is no need to set this

component.

132

Restore to Factory

Settings

0-1

Set to 1. Vertically press the ‘OK’ button for 5

seconds, then return to the display interface.

Usage of the OK button

You can switch the display information between: water temperature, battery voltage, distance,

default power. After a successful scan, you can display the distance.

Pull the button downward for 5 seconds to turn off the alarm buzzer, and the icon will disappear.

Push the button upwards for 5 seconds to turn the alarm buzzer on, and the icon will appear.