Installation Guide

20 English
Tools and materials
Usage situations where appliance power cord will be disconnected
frequently
Do not use an adapter plug in these situations because disconnecting of the
power cord places undue strain on the adapter and leads to eventual failure
of the adapter ground terminal. Where a standard two-prong wall receptacle
is encountered, it is the personal responsibility and obligation of the customer
to have it replaced with a three-prong (grounding) receptacle by a qualied
electrician before using the appliance.
Additional installation requirements for mobile homes
The installation of appliances designed for mobile home installation must conform
with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part
3280 (formerly the Federal Standard for Mobile Home Construction and Safety,
Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition (Manufactured Home Sites,
Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes. In
Canada, mobile home installation must be in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation Code.
Power cord location
2
1
⁄8 in
5
3
⁄4 in
Power cord location
The power cord for this appliance is
located on the back of the range, near
the bottom right hand corner. The 53 in
(135 cm) power cord will come installed
on the range and taped to the back for
shipping.
Tools and materials
What's in the box
Parts supplied
Surface burners and caps (5) Surface burner grates (3)
Oven racks (2) Anti-tip bracket kit
• Make sure you have received all of the supplied parts shown above.
• If your range was damaged during shipping or you do not have all of the
supplied parts, contact your local retailer.
Installation requirements
Install_NX58R4311SS_AA_DG68-01153A-00_EN.indd 20 2019-01-22  2:27:55