Manual

Distribution Board Components

1 5V, 9V and 12V LED Indicator - When illuminated, the LED indicates the presence of the

corresponding voltage in the satellite’s circuitry.

2 GND, 12V, 9V and 5V Sources - Voltage source pins provide terminals for monitoring the

satellite’s internal voltages with the use of a digital multi-meter or an oscilloscope.

3 Timing Mechanism Cable Socket - VP Timing Mechanism data cable connection socket.

4 Data Cable Socket - (For future use.)

5 Power Source Socket - 15 VAC input power cable from the satellite’s transformer.

6 RS-232 Data Socket - The RS-232 Data connector enables the satellite to interface with a laptop

or Hand-Held PC.

Output Board Components

1 Output Board LED Indicator - When

illuminated, the LED indicates that power is present at

the output board.

2 Station LED Indicator - When illuminated,

the LED indicates that the corresponding station

output has been activated.

3 Output Board Fuse - Each output board

is equipped with a 3A fuse. Placing individual fuse

to each board enables the satellite to bypass any

shorted output board and continue operation to the

remaining output boards.

4 Fuse LED Indicator - When illuminated, the

LED indicates that the fuse is functional.

5 Standard Station terminal Connector

- If no additional surge protection is needed, the

standard station terminal connector is sufficient for

station connection.

6 Surge Output Board - The surge output

board is used in lightning prone areas where

additional surge protection is needed. The Surge

Output board also allows the user to manually

activate or deactivate any station with a switch.

OFF

AUTO