Manual

Syringe - Choose Syringe to activate all the stations in a selected irrigation program for a specified runtime.

Note: The Maximum number of simultaneous stations set in the program still applies.

Manual Syringe Activation Directions

Syringe activation example: Manually activate all the stations in Program 3 for 2 minutes each.

Note: An irrigation program must be configured to activate Manual Syringe.

1. Press the Manual Watering Key .

2. The cursor should be located in the Manual field. Use the Input Dial to select Syringe.

3. Press the Down Arrow to advance the cursor to the Runtime: field. Use the Input Dial to

select the correct value of the runtime in minutes. For this example, set the value to 02 minutes.

Note: The Runtime setting in Syringe will not affect the actual runtime in the program.

4. Press the Down Arrow to advance the cursor to the Program: field. Use the Input Dial to

select the correct program to syringe. For this example, select program 03.

5. Once finished, press the Start Key to activate or press the Home Key to cancel and revert back to

the default display.

Note: Pressing the Home Key will save the entered values.

When finished, the display should read:

Manual: Syringe

Runtime: 02 min

Program: 03

Press START to water

Start Program - Select Start Prog to activate a watering program regardless of its set start time.

Manual Program/GMM Activation Directions

Start Program example: Manually activate Program 36.

Note: An irrigation program must be configured to activate Manual Program. A program on hold can still be

manually activated.

1. Press the Manual Watering Key .

2. The cursor should be located in the Manual field. Use the Input Dial to select Start Prog.

3. Press the Down Arrow to advance the cursor to the Program: field. Use the Input Dial to

select the correct program value or GMM. For this example, select program 36.

4. Once finished, press the Start Key to activate or press the Home Key to cancel and revert back to

the default display.

Note: Pressing the Home Key will save the entered values.

When finished, the display should read:

Manual: Start Prog

Program: 36

Press START to water

Note: Manually starting a GMM will prevent subsequent scheduled GMM starts. To reestablish the GMM

scheduled starts, you will be required to download the GMM program again from SitePro or reassign the GMM’s

active days at the satellite.