Specification
EN
W415-1755 / 05.03.17
11
installation
3. Secure top trim.
4. Insert the 4 brackets into the slots on the side
trim pieces. See above for a rear view of bracket
installed.
REAR VIEW
VUE D’ARRIÈRE
6. Tighten the two interior screws and secure the
bottom trim using two additional screws.
7. Insert the two brackets into the slots on the bottom
trim.
If the bottom trim pieces are desired, continue with installation instructions below.
note:
5. Loosely secure each side trim then hook bottom
trim onto screws and slide to the left.
X4
X2
X2










