Warranty

10
ASSEMBLY INSTRUCTIONS
Hardware Used
FF
LL
12. Slide Φ8 washers (FF) over the threaded ends of
reflectors spacers (EE). Attach reflector assembly to head
assembly (C). Place Φ8 washers (FF) over threaded ends
of reflector spacers (EE) sticking out through reflector
assembly and secure with wing nuts (LL).
Note: Do not overtighten.
13. Instruction on using the wheels.
Tilt the heater forward and turn the wheel rack out. Put
heater upright. To hide the wheels, tilt the heater forward
and turn wheel rack underneath the housing.
x 6
Φ8 Washer
x 3
Wing Nut
12
13
KK
GG
C
EE
LL
FF
Lowes.com
11. Attach reflector plate (B) to reflector panels (A)
using M6 X 10 mm screws (JJ) and Φ6 washers (II).
Secure loosely with cap nuts (KK). Once properly
aligned, tighten all screws and the preassembled bolts.
KK
II
JJ
Hardware Used
II
JJ
KK
x 6
x 6
x 6
Φ6 Washer
M6 X 10 mm Screw
Cap Nut
11