Warranty

6
Hardware Used
CC
2
x 4
ASSEMBLY INSTRUCTIONS
Hardware Used
1. Put the cylinder housing (G) on the ground upside down.
Open the door and tighten door knob (AA) with M4 X 5
screws (BB).
2. Connect the base (H) to the front and back of the
bottom of cylinder housing (G) with 4 M6 X 12 bolts. Make
sure the wing nut is on the door hinge side so that the
wheels are on the back of the housing. Flip the cylinder
so the table is on the top.
1
WARNING
This product contain sharp edges on
the panels,cylinder housing and
handle please install with care.
AA
x 1
Knob
Lowes.com
BB
CC
AA
G
H
BB
x 1
Screw M4 X 5
Bolt M6 X 12