User Manual

Data sheet
BMP085
Page 23
BST-BMP085-DS000-06 | Revision 1.3 | August 2011 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
5.4 Tape on reel
Number of parts per reel: 3,000
Orientation of the parts inside the reel is according to EN60286-3.
Carrier tap
e material: Conductive polystyrene C 100, 10
3
– 10
6
Ohm/sq.
Dimensions are in mm:
A
0
= 5.30 ± 0.10
B
0
= 5.30 ± 0.10
K
0
= 2.10 ± 0.10
P = 8.00 ± 0.10
W = 12.00 +0.30 / -0.10
t = 0.30 ± 0.05
The bars between the cavities are embossed about 0.2mm into the direction of K
0
. All other
dimensions and tolerances follow the EIA 481 standard.