User Manual

Data sheet
BMP085
Page 22
BST-BMP085-DS000-06 | Revision 1.3 | August 2011 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
5.2.2 Top view with lid
Figure 10: Top view with lid
5.2.3 Side view with lid
Figure 11: Side view with lid
5.3 Device marking
The device lid shows the following laser-marking:
Pin 1 identifier
Date code
Bosch logo / vent hole / last 3 digits of part ID (TTN)
Lot
ID
The vent hole (diameter 0.5mm) is in the center of the lid, between the Bosch logo and the part
ID code (144).