Data Sheet

2
Rev. 1/20
The Multi Pro 5800 is manufactured in
Tomah, WI ISO 9002 Certified Plant.
Multi Pro
®
5800 Specifications
*
A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing.
Always wear proper clothing and mask when applying chemicals.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
MULTI PRO 5800-G, MODEL 41394
ENGINE
Kubota® WG1605, rated output: 50 hp (37.3 kW), 1.6 L, 4-cylinder liquid-cooled electronic fuel injection, throttle control, three-way catalytic converter, gear-driven
valve train, and a diagnostic port.
COOLING SYSTEM
Mid-mounted 3.3 (3.12 L) quart radiator with oil cooler mounted in front.
FUEL SYSTEM
12 gallon (45 L) polyethylene/nylon low-permeation fuel tank with 1.5" (38 mm) opening on the passenger side for fueling; non-vented fuel cap with electronic fuel
gauge on the console, in-tank fuel replacement filter, (unleaded gasoline), evaporative emission system with carbon cannister.
TRACTION SYSTEM
Hydrostatic system driving double planetary gear reduction rear wheel drives; foot pedal control of forward/reverse ground speed.
GROUND SPEED/CLEARANCE
Forward: 0-10 mph (0-16.1 km/h). Reverse: 0-4 mph (0-6.4 km/h).
TIRES
Front: 23” diameter rounded profile, 4-ply rated tire with smooth tread pattern; wheel has 5-hole bolt pattern for lugs.
Rear: 26.5” diameter rounded profile, 6-ply rated tire with turf tread pattern; wheel has 8-hole bolt pattern for lugs.
BRAKES
2-wheel mechanical cable operated multi disc wet brakes with additional hydrostatic braking through drive train.
MAIN FRAME
Welded high strength steel tubular construction.
SUSPENSION
Front: straight axle with twin independent leaf springs and dual shock absorbers. Rear: rigid with high flotation rear tires.
STEERING
Fully hydraulic with dedicated power source 48° steering angle.
GAUGES/INDICATORS
Ignition key switch; analog spray system pressure gauge; fuel gauge; battery voltage lamp; oil pressure warning lamp; coolant temperature warning lamp; InfoCenter
display console.
CONTROLS
Throttle control; spray pump switch; tank agitation switch; individual boom section switches; master boom switch; speed-lock switch; manual/automatic spray mode
switch; boom lift/lower switches; manual application rate control (pressure) switch; USB port; 12V power socket; ExcelaRate™ automatic spray rate control (via
InfoCenter).
SEATS
Bucket seats with easy tilt forward bracket; removable bolts allow for adjustment for various seat positions; seats are interchangeable from left to right.
ELECTRICAL FEATURES
12 volt. 690 cold cranking amps at 0° F (-18° C). 12 volt, 60 Amp alternator. Dash mounted ignition switch.
LIGHTS
Rectangular 12 volt. 37.5 watt halogen sealed beam headlights.
SOUND LEVEL
90 dB(A) at operator ear under normal operation
WEIGHT
Drive-on weight: 2,882 lbs. (1,307 kg), Shipping weight: 2,882 lbs. (1,307 kg), Empty vehicle: 2,882 lbs. (1,307 kg),
Full w/ Operator: 5,692 lbs. (2,582 kg), MGVW: 6,692 lbs. (3,035 kg).
DIMENSIONS
Measurements with spray system—
Overall Length: 154" (391 cm) booms forward. Turning Diameter: 15’-7” (4.7 m) front tire inside
Ov
erall Width:
88" (224 cm) booms f
orward..
26’-7” (8.1 m) fr
ont tire outside
Heigh
t:
83.5" (212 cm) to top o
f ROPS
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
CERTIFICATION
SAE 2258 Dec. 2003 and EU 98/37EC Machinery Directive. 2014/108/EC (EMC).
SPRAYER SPECIFICATIONS
SOLUTION TANK
Elliptical, high-density, impact-resistant polyethylene with large 16” (41 cm) fill opening.
RATED CAPACITY
300 gallon (1,136 liter).
SPRAY PUMP
Hardi 364 / 10.0 6-diaphragm positive displacement; flow rate 45 gpm (170.3 lpm), 220 psi (1500 kpa) maximums.
AGITATOR
4, side-mounted jet agitation nozzles for full tank agitation.
BOOM ASSEMBLY
20.5’ (6.25 m), 4 nozzles per selection, triangular truss-style open boom. 12 total triple-turret nozzle mounts with diaphragm check valves.