Instructions / Assembly

ManualsBrandsUnbranded ManualsOutdoor Lounge ChairsSwivel Metal Xtreme Outdoor Lounge Chair

6HDW3RVW

6HDW3RVW3ODWH

3LVWRQ

%DVH

8SSHU6HDW

)UDPH

WARNING: Read all assembly instructions prior to using this

product. Failure to follow these instructions and warnings may

result in serious injury or death!

Parts List (MGS600)

Part# Description

Qty

UP16-0131 Upper Seat Frame 1

UP18-0022 Seat Post Plate 1

UP16-0132 Seat Post 1

UP16-0133 Piston 1

UP16-0134 Base 1

UP16-0135 Footrest 1

Manual 1

HARDWARE LIST

UP77-0203

[

A] 5/16” x 1 3/4” Carriage Bolt

UP77-0162

[B]

1/4” x 1” Carriage Bolt

UP77-0029

5/16” Nylock Nut

UP77-0001

1/4” Nylock Nut

Swivel Xtreme

Blind Chair

Model

MUD-MGS600

FIG 1

MUD-MGS600 SPECIFICATIONS

Maximum Load Capacity 300 lbs/136 kg

6HDW3RVW

)RRWUHVW

3LVWRQ

%DVH

STEP 1. Begin by rmly sliding the piston into the base. Then,

using (4) 1/4’’ x 1’’ carriage bolts [B] and (4) 1/4’’ nylock nuts attach

the seat post and seat post plate to the upper seat frame

. (Fig. 1)

STEP 2. Next, slide the footrest over the piston and then rmly

slide the seat post onto the piston. (Fig. 2) Finally using (1)

5/16” x 1 3/4” carriage bolt [A] and (1) 5/16” nylock nut secure the

footrest to the lowest point of the seat post.

FIG 2

Check to make sure you have all the required parts and hardware. If you

nd damaged or missing parts in a newly purchased product, please

return this product to the retailer for replacement.

PO Box 539189 • Grand Prairie, TX 75050 • (877) 269-8490 • www.GoMuddy.com

Summary of content (1 pages)

PAGE 1
Swivel Xtreme Blind Chair Model MUD-MGS600 WARNING: Read all assembly instructions prior to using this product. Failure to follow these instructions and warnings may result in serious injury or death! STEP 1. Begin by firmly sliding the piston into the base. Then, using (4) 1/4’’ x 1’’ carriage bolts [B] and (4) 1/4’’ nylock nuts attach the seat post and seat post plate to the upper seat frame. (Fig. 1) STEP 2. Next, slide the footrest over the piston and then firmly slide the seat post onto the piston.