Assembly Instructions 24 inch Navigator Bike
Required Tools (not included in the package): 1. 1pcs Open ended wrench: 13mm/15mm 2. 2pcs Allen key wrenches: 5mm/6mm 3.
1） Carefully open the carton and remove the foam, then remove the bike and the accessories, gently rest it on the flat floor.
2）Front tire assembly：attach the front tire to the front fork, insert the quick release leaver on front wheel, tighten the nut clockwise until it is snug against the fork. Then close the quick release leaver to secure the wheel to the fork (Noted the direction of the tire tread).
3）Stem assembly：insert the front head stem into the front fork, adjust the height of the stem, adjust the direction to make sure head stem vertical to front tire.
4）Seat post assembly：quick release set into the frame, adjust the post and the seat, then tight the quick release at 25N.
5） Pedal assembly：Tight the right and left pedal into the cranks.(note the rotation and which is left and right pedal. Marked with “L” and “R”).
6） Front V-brake: The brake cable hook penetration V-brake, note the front wheel should be rotating flexible and the brake should be sensitive.
7) Luggage carrier assembly (optional part, not come with bike)
