Instructions / Assembly

ManualsBrandsUnbranded ManualsGarage Shelving18 in. D x 48 in. W x 8 in. T Hammertone Grey Heavy-Duty Steel Wall Mounted Shelves Includes 2 Shelves and 4 Hooks

US PATENTS: D716,581 | OTHER PATENTS PENDINGS

877–655–3443 • www.SafeRacks.com

CUSTOMER SERVICE

NEED ASSISTANCE?

Should you have questions regarding the instructions provided you can reach out to our

customer service and we’d be happy to help!

■ PHONE: (877) 655-3443

■ EMAIL: support@saferacks.com

■ HOURS: MONDAY - FRIDAY 9:00 AM - 7:00 PM CST, SATURDAY 10:00 AM - 5:00 PM CST

Assembly Instructions

Steel Wall Shelves

12” x 36” | 18” x 36” | 18” x 48” | 24” x 48”

250LB

PER SHELF (18” & 24”)

Eagle Industrial Group Inc.

Limited Lifetime Warranty

WARNING:

This product can expose you to

chemicals including lead, which is known

to the State of California to cause cancer

and birth defects or other reproductive

harm. For more information, go to:

www.P65Warnings.ca.gov

Assembly Instructions

STEEL WALL SHELVES

150LB

PER SHELF (12”)

Summary of content (4 pages)

PAGE 1
Assembly Instructions Steel Wall Shelves STEEL WALL SHELVES Assembly Instructions 12” x 36” | 18” x 36” | 18” x 48” | 24” x 48” 250LB WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: PER SHELF (18” & 24”) 150LB www.P65Warnings.ca.gov PER SHELF (12”) © 2007-2021 Copyright Eagle Industrial Group Inc.
PAGE 2
Assembly Instructions Steel Wall Shelves 12in. Wall Shelf Components: Wire Shelves x2 2.5” Lag Bolt x8 Flat Washers x8 Clip x2 Screws x4 2.5” Lag Bolt x12 Flat Washers x12 Clip x2 Screws x4 Bracket Pairs x2 18in. and 24in. Wall Shelf Components: Wire Shelves x2 Bracket Pairs x2 Recommended Tools (not included): 3/16” Drill Bit Phillips Screwdriver Bit Power Drill Stud Finder Tape Measure 5/16” Socket Pencil 877–655–3443 • www.SafeRacks.
PAGE 3
Assembly Instructions Steel Wall Shelves 1 Locate your wall studs: Use your stud ﬁnder to locate your wall studs. Typical wall stud spacing is 16” on center. 2 Determine your desired shelf height and mark the hole locations of your wall bracket. x3 x3 3 Pre-drill your pilot holes using your 3/16” drill bit. 4 Secure your wall bracket: Use your 5/16” socket, washers, and lag bolts to secure your bracket to the wall (12” assemblies require 2 bolts and 2 washers per bracket only).
PAGE 4
Assembly Instructions Steel Wall Shelves 32in 2 Wires 2. 1. 4 Wires 16in 5 Determine the distance between your brackets: Typical distance between wall brackets it 32”, however 16” is acceptable for 36” length wire decks. 6 Install your shelfs: Locate the front and back of your shelf. The front has 4 wires running horizontally. The back has 2 horizontal wires only. Install by securing the front and lowering the back into place as shown above.