Technical Data Bulletin

Mortairvent Masonry Rainscreen 04 05 23.19 - 2
1.3 REFERENCE STANDARDS
Specifier Notes: List reference standards mentioned in this section, complete with designations and
titles. Delete reference standards not included in this edited section. This article does not require
compliance with reference standards, but is merely a listing of those used.
A. ASTM D 792 – Standard Test Methods for Density and Specific Gravity (Relative Density) of
Plastics by Displacement.
B. ASTM D 4716 – Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width
and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head.
C. ASTM D 5261 – Standard Test Method for Measuring Mass per Unit Area of Geotextiles.
D. ASTM D 6525 – Standard Test Method for Measuring Nominal Thickness of Permanent Rolled
Erosion Control Products.
E. ASTM D 6566 – Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement
Mats.
F. ASTM E 84 – Standard Test Method for Surface Burning Characteristics of Building Materials.
G. Erosion Control Technology Council (ECTC) TASC 00197 – Porosity Test.
1.4 SUBMITTALS
Specifier Notes: Edit submittal requirements as required. Delete submittals not required.
A. Comply with Section 01 33 00 – Submittal Procedures.
B. Product Data: Submit manufacturer’s product data, including preparation and installation
instructions.
C. Samples: Submit manufacturer’s sample of masonry rainscreen, minimum 6 inches by 6
inches.
D. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with
specified requirements and are suitable for intended application.
E. Warranty Documentation: Submit manufacturer’s standard warranty.
1.5 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: Manufacturer regularly engaged, for past 5 years, in manufacture
of masonry rainscreen of similar type to that specified.
1.6 DELIVERY, STORAGE, AND HANDLING