Installation Guide

Product Name: 10x20 Canopy Tent

Origin Place: China

Notes: Suggest at least 4 people assemble the product at the

same time

Warning:

1. Take the canopy out of the box carefully and place on dry and

everurface(sand, grass, or hard surface)

2. Do not attempt to assemble tent alone because this could put

unnecessary stress on the legs. And it could get damaged if the

tent are not pulled apart at the same time

3. Secure tent in windy conditions by using the rope that is locat-

ed on each side of the canopy and hammering stakes into the

ground to balance the sides of tent.

4. If the canopy is placed on a hard surface, secure the 4 pole

with bricks or sand bags to weigh the canopy down

5. Do not assemble tents in rain, strong wind or snowing weath-

er conditions, because it may damage your tent

6. It’s the owner’s responsibility if the tents are set-up and dam-

aged during these conditions.

PAGE 1
Product Name: 10x20 Canopy Tent Origin Place: China Notes: Suggest at least 4 people assemble the product at the same time Warning: 1. Take the canopy out of the box carefully and place on dry and everurface(sand, grass, or hard surface) 2. Do not attempt to assemble tent alone because this could put unnecessary stress on the legs. And it could get damaged if the tent are not pulled apart at the same time 3.
PAGE 2
Part List 1 x Folding Steel Frame & Canopy Top 1 x Carry Bag 2x Zipper Walls 4x Sidewalls 6 x Sand bags 6 x Pull ropes 12 x ground stakes Notes: Before assemble the product, please check all the parts and make sure there is no missing. Any parts missing, please feel free to contact us.
PAGE 3
Step 2 Propping up the top button of the each cornor Step 4 Secure all parts with the tape Step 3 Adjust the height of 4 legs （adjustable in 3 height ） Step 5 Fixed legs
PAGE 4
Step 6 Install sidewalls Step 7 Placement of ground stakes in the soil Step 8 Fill sandbags & Fixed to each leg of the tent Close the tent Reverse previous steps to close the tent