Data Sheet

MLT-42-W Compact Inspection Robot
with PTZ Camera
Overview
SuperDroid Robots, Inc | 224 Technology Park Lane | Fuquay-Varina, NC 27526
919-557-9162 | www.superdroidrobots.com
Revised: Sep 21, 2017
Standard Configuration
This is an easy to use tracked robot
intended for inspecting pipes or areas
with low clearance heights. It is versatile
and easy-to-use.
It includes a pan and tilt camera with 30X
optical zoom. The robot comes
programmed, fully assembled, and ready
to run right out of the box.
Chassis: Aluminum sealed chassis
Lights: 12 Powerful LEDs mounted to the camera
Speed: up to 100 feet per minute
Runtime: Up to three hours
Camera System: Custom 360 degree pan and -10 to
+90 degree tilt with a 30X Optical Zoom 1/4 inch Sony Color CCD.
Audio: None
Interface: Custom Remote System with Tablet OCU, selected below.
Weight: 15 lbs as configured
Dimensions: 13" wide x 16" long x 12" high
Other Options
Encoder Option: This option allows you to keep track of the
distance the robot has travelled and displays the information on
the tablet controller. This is great for keeping track of where
you are when you see something of note with the inspection
camera. The distance is measured by keeping track of the pulses
from each motor rotation.
Custom Paint Option: The robot comes standard painted
SuperDroid Blue. If you would like a different color select the
custom color and we will contact you for the paint color code.
Control Options
Wi-Fi Control System: For use in open areas and short
distances into unobstructed areas. Wi-Fi will not typically
work well underground, in pipes, etc. where the wireless
signal is degraded or blocked.
Wi-Fi and Tethered System with 250ft Ethernet Cable:
When the signal is too weak for wireless, plug in the
supplied 250ft Ethernet cable to switch to tethered mode.
We use high quality outdoor rated cable with waterproof
connectors. With this option, the cable is not on a spool.
Shorter lengths of the cable can be made. Contact us if you
need a custom cable length.
Wi-Fi and Tethered System with 250ft Ethernet Spool: This
is the same as the previous option except the cable comes
on a spool. The spool allows easy deployment and
retraction of the Ethernet cable.
Tethered System with 500ft Cable Spool: For those that
know wireless will not work for your application and need
to go up to 500ft, this is the best option. The robot will only
operate when the tether is connected between the tablet
and the robot. If you need a shorter cable, please contact
us.