Manual

7
ON OFF PELCO-D
OFF ON PELCO-D/P
(BPS)
ON ON PELCO-D/P
OFF OFF 9600
ON ON 9600
OFF ON 4800
Control
protocol
ON OFF 2400
8-bit DIP switch is used to set the dome camera address coding. Address set binary mode can be set to a total of
256 different dome camera address coding, see coding table address.
Camera address coding form
Camera
address
1 2 3 4 5 6 7 8
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF