Manual

16
RIGHT LIMIT POSITION
IRIS OPEN TO CONTINUE
Shake the joystick to select the right limit position; Press IRIS+ button to
confirm and return to the table 3-4.
TABLE 3-4-3 SET THE RIGHT LIMIT POSITION
3.7.3 CLEAR FRAME SCAN (Clear area scan location)
CLEAR FRAME SCAN IRIS
OPEN TO CONTINUE
Press IRIS+ to clear the left and right limit position and return to the table 3-4.
TABLE 3-4-4 CAMERA SETTINGS MENU
3.7.4 <POWER UP>
The dome camera is powered on, didn’t receive any instructions to perform action. Parameters in the following table:
POWER UP Menu function descriptions
NONE Don’t perform any actions.
AUTO SCAN Perform continuous scanning action.
RANDOM SCAN Perform intermittent scanning action.
FRAME SCAN Perform area scanning action.
PRESET 1 To reach the NO.1 preset point.
PRESET 8 To reach the NO.8 preset point.
PATTERN 1 Perform the pattern scan line 1
PATTERN 2 Perform the pattern scan line 2
PATTERN 3 Perform the pattern scan line 3
PATTERN 4 Perform the pattern scan line 4
CRUISE Perform the cruise action of preset point.