Manual

14
ADDR SETTING Menu function descriptions
ADDR TYPE HARD
Divides HARD and SOFT; select the SOFT can directly determine the dome
camera address.
ADDR SOFT 1 Within 1~254.
ADDR HARD 1
BACK Returns to main menu.
RESET To restore the default.
EXIT Exit the menu setting.
Note: Can’t mix up the soft and hard address settings, would create the dome camera out of control,
setting reboot to be valid.
TABLE 3-3 ADDR SETTING
3.7 <MOTION> (PTZ settings)
Menu is used to set PTZ parameters such as movement and orientation angles. As shown in the following table:
MOTION Menu function descriptions
SET FRAME SCAN Set the area scan to the left and right limit. In the table 3-4-1.
POWER UP NONE Power on setting menu. In the table 3-4-5.
PARK TIME 15S How long to perform an action when the dome camera is idle.
PARK ACTION NONE Perform an action when the dome camera is idle. In the Table 3-4-6.
FRAME SCAN SPEED 16
Set the area scan speed of the dome camera.
Within 1 (Slowest) ~32 (Fastest).