SDS
Rev: 9/1/2023 Page 4 of 7 SDS: Mighty Micros
Personal
Protective
Equipment:
Eyes: Chemical splash-proof goggles (where splashing is possible)
Skin: Impervious gloves (rubber, neoprene or nitrile), long sleeved clothing.
Chemically resistant apron is recommended.
Respiratory: None required for ambient air concentrations(i.e. in the open under
normal agronomic conditions) not exceeding occupational exposure limits.
Respiratory protection may be required in the event of a spill in an enclosed area
or under misting conditions. Use a NIOSH/MSHA approved SCBA with full face
piece operated in a positive pressure mode.
General:
Eye wash stations and safety shower recommended.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Dark, Opaque liquid
Odor:
sweet/woody odor
UEL / LEL:
Not Applicable
Odor Threshold:
Not Available
Vapor Pressure:
Similar to water
pH:
2.7 to 3.8
Density:
1.19 to 1.21 g/cm
3
Melting/Freezing Point:
<0°C (32°F)
Solubility:
Water
Boiling Point:
> 100°C (212°F)
Log
OW
:
Not Available
Flash Point:
Not Applicable
Auto Ignition Temp:
Not Applicable
Evaporation Rate:
Similar to water
Decomposition Temp:
Not Available
Flammability (Solid/Gas):
Not Applicable
Viscosity
Not Available
SECTION 10. STABILITY AND REACTIVITY
Reactivity:
Stable
Chemical Stability:
Stable under normal conditions
Possibility of Hazardous
Reactions:
Hazardous polymerization will not occur.
Conditions to avoid:
Avoid exposure to extreme temperatures, contact with incompatible
chemicals. Elevated temperatures may cause containers to rupture.
Extreme cold temperatures may cause product to salt out.
Incompatible Materials:
Water reactive materials, strong oxidizers.
Hazardous
Decomposition Products:
Manganese, iron and zinc compounds, sulfur oxides and carbon oxides