Specification

SPECIFICATIONS

ADJUSTABLE PIPE FLASHING #MF3RTC

TYPICAL PHYSICAL PROPERTIES OF MF EPDM: ASTM D2000 M3BA510 A14, B13, C12, F17, Z1, Z2, Z3, Z4, Z5.

PROPERTY VALUE TEST METHOD

BASE MATERIAL CROSS LINKED EPDM N/A

COLOR TERRA COTTA N/A

TEST LEVEL 3 GRADE

TEST TEMPERATURE B 100° C GRADE

VOLUME SWELL NO REQUIREMENT CLASS

DUROMETER 50 (SHORE) ASTM D 2240

TENSILE STRENGTH 9 MPA (1305 psi) MIN. ASTM D 412

ULTIMATE ELONGATION 400% MINIMUM ASTM D 412

A14 HEAT AGING 70 hrs. @ 100° C

ASTM D 573

B13 COMPRESSION SET 22 hrs. @ 70° C - Max. 25% ASTM D 395 B

C12 OZONE RESISTANCE 70 hrs. @ 50 pphm ASTM D 1171

F17 LOW TEMP. BRITTLENESS 3 MINUTES @ -40° C ASTM D 2137A, 9.3.2

Z1 TARGET HARDNESS 55+/-5 SHORE A ASTM 2240

Z2 SPECIFIC RUBBER EPDM PASS

Z3 FLAME RESISTANCE < 3 IN./MIMUTE UL-94

7 ¾ in. (19.7 cm) Base. Overall Height: 4 in. (101 mm)

EPDM: ETHYLENE PROPYLENE DIENE TERPOLYMER

1. Change in hardness Max +10 pts. Change in tensile Max -25 % Change in ultimate elong. Max -25%

7 ¾ in.

19.7 cm

4 in.

10.16 cm