Instructions / Assembly

9. After shaping the whole tree, step back and take an overall look. Shift branches to fill
any gaps. Slightly upsweep all branch tips for a uniform look. Your tree is now ready to
decorate and enjoy.
Storage:
1. Unplug extension cord from the wall outlet and remove all ornaments and decorations.
2. Unplug each section from extension cord, keep each stack of lights connected together.
3. Gently lift off the top and middle sections, and remove the bottom section from the tree stand. Carefully place the
tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA OR IN AN AREA WHERE THE
TEMPERATURE EXCEEDS 100˚F.
Trouble Shooting Instructions
If lights do not work:
1. Check whether the extension cord is properly plugged into the outlet.
2. Be sure there is power to the outlet.
3. Check whether all plugs within the tree are securely connected.
4. Check whether all bulbs are tightly fixed inside the lamp holder.
5. If bulb is blown, replace the faulty bulb following the below diagram. There are spare bulbs included for easy
replacement.
6. If none of the lights are working, check the fuse in light string. If the fuse is blown, replace the blown fuse following
the below diagram. There is a spare fuse included for easy replacement.
7. If none of the lights are working, check the fuse in extension cord. If the fuse is blown, replace the blown fuse
following the below diagram. There is a spare fuse included for easy replacement.
Note: For festive use only, not intended for consecutive use over 90 days each season.
SAVE THESE INSTRUCTIONS
Pg. 2