Instructions / Assembly

INSTALLATION of CABINET
1. Carefully remove all packing material. Place
shelves and hardware aside until needed.
2. Determine desired location of cabinet on
wall. Mark wall
to show wall opening size.
Generally, the
recommended height to the
center of the
cabinet is 64" from the floor. Fig. 1
3. CAUTION: Wall studs, plumbing or
electrical lines that
interfere must be removed
or relocated. Cut
wall opening, being careful
not to damage the surrounding wall surface.
Insert framing to support all plaster board
edges.
4. Insert cabinet into wall opening in plumb
and centered position. Use a carpenter's level
and shim corners of cabinet if necessary.
5. Once cabinet is inserted into wall, measure
down 4" from the top and the bottom of the
cabinet. Center the measurement on the
sides of the cabinet.
Fig 2.
6. Using a drill bit, drill a total of 4 pilot holes
in the locations determined in Step 5. Secure
to wall studs through the 4 mounting holes
in
side cabinet (screws

A

A

provided)