Instructions / Assembly

Inner Upright Chime Assembly
Eye Bolt
(Apply Locktite)
3/8"-16
Tamper-Resistant Nut
3/8" ID Washer
3/8" ID Washer
Mallet Assembly
1 3/16" Spacer
3/8" ID Washer
3/8"-16 Tamper-Resistant Nut
3/8"-16, 5" lg. Socket Cap Screw
(Apply Locktite)
3/8"-16, 5" lg. Socket Cap Screw
(Apply Locktite)
3/8" ID Washer
3/8" ID Washer
Chime Assembly
Outer Upright
3/8"-16
Tamper-Resistant Nut
1 1/2" Spacer
CHIME ASSEMBLY INSTALLATION PROCEDURES
Step 1:
After the Inner and Outer Uprights have been properly installed attach the Chime Assembly to the Uprights.
Step 2:
Follow the diagrams below for installation of the Chime Assembly. Before installing the tamper-resistant nuts, apply the provided blue locktite to the
threads of of the 5 bolts on the Chime Assembly. After the blue locktite is applied, fasten down nuts with the provided #30 Square-Drive Socket.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
WWW.FREENOTESHARMONYPARK.COM
SHEET 5 OF 5
SCALE: 1:3
PRODUCT SHEET / INSTALLATION GUIDE
MANTA RAY 2016