Use and Care Manual

Product Use / Charging
1. Place and charge: the charging base should be placed against
the wall and on the flat ground. Do not place any items within
the range of 0.5m left and right and 1.5m ahead.
2. Connect to the power supply.
3. Install the side brush: on the left and right (L/R).
Attention:
4．Charging: place the robot on the charging base for charging.
(The charging cycle takes about 5 hours.)
1. The charging base cannot be exposed to strong light or light
reflection such as direct sunlight or mirrors. If there is any object
with strong reflection, please cover it 7 cm from the bottom.
2. In order to ensure the normal working hours of the robot, please
fully charge it before use. The charging takes about 5 hours.
During the cleaning process, the robot can automatically enter
the recharging mode and returns to the charging base when the
power is insufficient. You can also control the robot to start the
recharging mode with the recharge button on the robot or through
the recharge button in your mobile app.