Use and Care Manual

Transport robot back to dock
Plug in power to charging base;
Place charging base as instructed;
Move robot close to charging base.
Drive wheel not on surface
Drive wheel stuck Check whether the drive wheel is entangled with objects and clean it up.
Check if the bumper can rebound normally and move to left,
right and back to center; If not, please check if something is
stuck in bumper.
Check if the fan is entangled; Check if the filter installed correctly.
Check if the side brush is entangled and clean it up.
Check if the main brush is entangled and clean it up.
Please put the robot back to the ground and press the Power button again.
Side brush stuck
Main brush stuck
Bumper stuck
Blower motor error
Prompt Tone
Solution
Investigation of Common Issues