Manual

1
12V Sensors LED
Indicates if a 12V sensor
is present.
Transmit LED
Indicates data packet
is being sent.
IN1 LED - Pressure
Indicates if a pressure sensor
is present.
Temperature Probe LED
Indicates if a temperature
sensor probe is present.
Temperature Probe Connector
Connector for temperature
sensor probe.
5V LED
Indicates 5V is active.
17V LED
Indicates 17V is active.
12V Stations LED
Indicates 12V is active.
24VAC LED
Indicates board is receiving
24VAC from satellite.
Power Connector
IN2-IN6 LEDs
Indicate sensor activity
for channels IN2-IN6.
The Lynx Smart Satellite Sensor (LSSS) Kit receives data
from ow, temperature, and pressure sensors, as well as
switches and rain buckets. The data is stored in the satellite
and relayed to the Lynx computer. User-dened alarms
and responses can be congured in Lynx when operating
in Central Mode, or locally when in Local Mode.
• Sensor data is stored in the satellite for 12 hours and
transmitted back to Lynx every 2 hours.
• Current sensor information and alarm status can be
viewed in the satellite’s faceplate.
• Central-based or stand-alone alarm responses can be
congured for any sensor input.
• When alarms are congured, Lynx will monitor the
sensor-kit equipped satellite at the polling interval. The
Sensor Dashboard Utility will monitor sensor status
every 15 seconds.
A handful of satellites will need a rmware update
to take advantage of the Lynx Smart Satellite Sensor
Kit. Please see p. 7 for rmware version instructions.
Kit
Components
• Sensor Input
Board
• Surge Board
• Mounting
hardware
• Fuse
• Labels
Table of Contents Page
1. Board Overview
2. Board Prep
3. Board Installation
4. Sensor Installation
5. Sensor Conguration
(Local Mode)
6. Sensor Conguration
(with Lynx)
7. Warranty & Support
1
2
2
3
4
8
10
Lynx Smart Satellite Sensor Kit
Installation and User Guide
Sensor Input Board Overview