Manual

9
7. Select the desired sensor from the dropdown list.
Enter the various limits and Qualication times
(Figure 3). For an explanation of these terms, please
see the Sensor Conguration section above.
Checking the Use Local Response checkbox turns
on a switch in the satellite containing the sensor
board for a timed duration.
Reviewing Sensor Data
It is possible to review sensor information in realtime or
historically.
Realtime:
Click Utilities then Sensor Dashboard. Select the Sensor
Input Board to monitor. You will see a screen similar to
Figure 4, though the number and type of sensors might
be different, as well as the ranges for the sensors.
Historic:
Click Report Generator then Sensors. Select the desired
sensor, the date range, and whether to view the sensor data
as a table (Figure 5) or graph (Figure 6).
Figure 4
Figure 5
Figure 6