Product Literature

www.Toro.com
The Toro Company, Irrigation Division • 5825 Jasmine Street, Riverside, CA 92504 • 877-345-8676 • Specifications subject to change without notice • © 2018 All rights reserved • P/N 18-5096-IG
SPECIFICATIONS
Sensors
The Sensor Input Kits can accept up to seven sensors; they are compatible with
the following sensors:
• (1) Pressure sensor
• (1) Temperature sensor
• (5) Flow meter, rain gauge, or switch status
Satellites equipped with Sensor Input Kits can accommodate up to 56 station
outputs:
• The Sensor Input Kit for Network VP includes a sensor input board that
takes the place of an eight station output board
• The Sensor Input Kit for Lynx Smart Satellite is a module that contains
eight station outputs and seven sensor inputs. It takes the place of a
sixteen station output board.
• Lynx version 5.0 or later is required for interaction with the Sensor
Input Kits
• The Sensor Input Kit for Network VP includes a new Timing Module with
faster processor, larger display, and expanded memory
Sensor Input Kit for Network VP
Model: VP-SEN-BUNDLE
• 118-5487SK: VP Timing Module, Sensor compatible
• VP-SEN-BRD-KIT: Sensor Board and Level 4 Terminal Board
Sensor Input Kit for Lynx Smart Satellite
Model: SMRT-SEN-BRD-KIT
Toro Pressure Sensor Kit
Model: PRESS200-SEN-KIT
• 0 – 200 PSI
• ¼” – 18 NPT male thread
Toro Temperature Sensor Kit
Model: TEMP-SEN-KIT
Recommended accessory: Radiation Shield Davis #7714
Rain Gauge
Recommended Model: Texas Electronics TR525I
Flow Meter
Recommended Models: Data Industrial 200 Series or Bermad 900M Series,
reed switch signal
Toro Sensors
Pressure Sensor
Approved Model:
PRESS200-SEN-KIT
Toro Pressure Sensor Kit: 0 – 200 PSI
Temperature Sensor
Approved Model:
TEMP-SEN-KIT
Toro Temperature Sensor Kit
Recommended Sensors
Radiation Shield for
Temperature Sensor
Recommended Model:
Davis #7714
Rain Gauge – Tipping Bucket
Recommended Model:
Texas Electronics TR 525I
Flow Meter
Recommended Models:
Data Industrial Series 200
or Bermad 900 M Series