Product Literature

Power-Up Diagnostics
Upon power-up, the satellite will display:
Lynx Smart Satellite
Booting
The Lynx Smart Satellite will automatically initiate a diagnostic test during power-up. This function will take
approximately ten seconds and it can not be bypassed. If a problem is detected during the test, it will be indicated
on the display. This status information can not be edited. The information is as follows:
Example:
Rev: 1.00 04/01/16
Detect: 64sta, 00sen
PD - 05/15/16 06:24pm
Lynx Smart Satellite Firmware Version and Revision Date
Date and Time of the Last Power Downtime
Detect: [xx station, yy senseors] (xx = number of stations detected,
yy = number of sensors detected)
The default Home display will follow after the diagnostic display has timed-out.
Home display example:
Sun 5/15/16 02:31 pm
Sat# 001-001 Sec: 57
Day Change: 12:00am
Lynx Smart Satellite
Home Key
Press Home to revert to the default display. When editing irrigation programs, Station or Satellite settings,
pressing Home
will save any changes in the settings.
Home display examples:
Sun 5/15/16 02:31 pm
Sat# 001-001 Sec: 57
Next start: 03:00am
Day Change: 12:00am
Lynx Smart Satellite
Typical home display with no active scheduled program
Sun 5/15/16 02:31 pm
Sat# 001-001 Sec: 57
Day Change: 12:00am
Running 02 programs
P01 Sta01 00:09:46
P01 Sta02 00:09:46
P05 Sta25 00:19:51
Home display with two active scheduled programs
Press Down
to access hidden display lines on the screen
If the current day is an active watering day but nothing is running, the next scheduled start time (Next Start:
HH:MM) will be displayed. If the satellite is running one or more programs, Running XX programs will be displayed
to indicate the number of active programs.
8