Product Literature

Station Amps – Displays the station’s current output. Press Down to navigate to the Sta
01: field, then use the Input Dial
to select the station you want to
monitor.
Reset Nominal Current - Press Down
to navigate to the Nominal: field.
Use the Input Dial
to select Reset. Press Down to reset.
Modify Tolerance - Press Down
to navigate to the Tol+/–: field. Use the
Input Dial
to set the desired tolerance from 0.040–0.900 amps.
Menu:
Sta 01 : 0.218 Amp
Nominal : 0.210 Amp
Tol +/- : 0.040 Amp
No alarm events
Pump Nomn: 0.212 Amp
Disable : No
Station Amps
Send Ctrl Code – Send controller code to the Lynx or SitePro Central Controller. The two-digit
commands are set in the Lynx or SitePro Central Controller to do a specific
task. To send a controller code, press Down
to navigate to the Code:
field. Use the Input Dial
to enter the code number. Press Start
to send.
Menu:
Code: --
Press START to send
Send Ctrl Code
Menu: VA Monitor – Monitors the satellite’s amperage, voltages and temperature in real-time. This
allows you to troubleshoot the satellite’s internal circuit voltages.
Menu:
Amp: 0.000 AD: 000
12V: 12.3 BV: 2.4
17V: 17.3 9V: 0.0
LCD: 26C VL:-05.2V
VA Monitor
Menu: Event Codes – Displays the satellite’s Event Code log. You can clear the log from this option.
Press Down
to navigate to the Clear log: field. Use the Input Dial
to select Yes, then press Down to activate.
Menu:
Clear log: No
Event Codes
Radio Tx Chars – The Satellite can be put in a mode that will transmit characters every five
seconds. This should only be used for diagnostic reasons because it will step
on other transmissions at the same frequency. It transmits ASCII sequential
values 0 through 9. The mode can last five minutes before the transmissions
automatically ends and the screen returns to the home screen.
Menu:
Press
to start
Radio Tx Chars
Radio Ping – The M7 radios can ping another M7 radio if they are set to Digital(Dig). It
requires the user to input the radio address that is being pinged. The ping
response from the other radio will show on the screen. The screen is only shown
when the radio is set to use the digital mode.
Menu:
Radio addr: ----
Resp:
Radio Ping
24