Product Literature

Start Program

Select Start Prog to activate a watering program regardless of its set start time.

Start Program example: Manually activate Program 16.

Manual: Syringe

Program: 16

Press to water

Start Prog

Note: An irrigation program must be configured to activate Manual Program. A program on hold can still be

manually activated.

1. Press the Manual Watering Key

2. Use the Input Dial

to select Start Prog.

3. Press Down

to navigate to the Program: field. Use the Input Dial to select the correct

program to activate. For this example, select program 16.

Note: If GMM (Group Multi-Manual) is set, it can be manually started under Start Program.

4. Press Start

to activate or press Home to cancel and revert back to the default display.

Note: Pressing the Home Key will save the entered values.

% (Percent) Adjust

The percent adjust function allows you to fine tune irrigation programs. With weather conditions changing

constantly, Percent Adjust allows you to tune your system easily without changing all the values in the program.

% Adjust Directions

Percent Adjust. . .

Satellite 100%

Program: P01 100%

Station: S01 100%

100%

1. Press the % Adjust Key .

2. Use the Input Dial

to adjust the smart satellite’s watering up to 900% or down to 1%.

Note: Satellite adjustment will affect all stations and programs universally. Do not adjust the satellite %

settings if the adjustment is station or program specific.

3. Press Down

to navigate to the Program: field. Use the Input Dial to select the program

being adjusted. Press Right

to navigate to the percent adjustment field. Use the Input Dial

to adjust the program watering up to 250% or down to 10%. Repeat step 3 to adjust additional programs.

Note: Do not adjust the program % setting if adjustment is station specific.

4. Press Down

to navigate to the Station: field. Use the Input Dial to select the station being

adjusted. Press Right

to navigate to the percent adjustment field. Use the Input Dial to

adjust the station’s watering up to 900% or down to 000%. Repeat step 4 to adjust additional stations.

Note: Adjusting the station’s watering to 000% will prevent it from running within a program. Multi-Manual

and Syringe are not affected by the % Adjustment.