Product Literature

6. Press Down to navigate to the next entry field. Notice that a new Sta: line was created. Fill this line only

if irrigating multiple ranges of stations, otherwise, leave this line blank.

7. Press Down

to navigate to the Simult: field. Use the Input Dial to set the maximum number

of stations that can be activated simultaneously. For this example, set the value to 03.

8. Press Start to activate or press Home to cancel and revert back to the default display.

Note: Pressing the Home Key will save the entered values.

When reviewing the Multi-Manual program by pressing the Manual Watering button, the display will deduct

the stations that watered or currently watering to the list.

Modifying the Multi-manual will append the added stations to the currently running manual. Currently running

stations will not be affected. The Lynx Smart Satellite will run the stations in sequential order disregarding the

order it was entered.

Syringe

Choose Syringe to activate all the stations in a selected irrigation program for a specified runtime.

Note: The Maximum number of simultaneous stations set in the program still applies.

Syringe activation example: Manually activate all the stations in Program 3 for 2 minutes each.

Manual: Syringe

Runtime: 02 min

Program: 03

Press to water

Syringe

Note: An irrigation program must be configured to activate Manual Syringe.

1. Press the Manual Watering Key

2. Use the Input Dial

to select Syringe.

3. Press Down

to navigate to the Runtime: field. Use the Input Dial to set the desired runtime

in minutes. This runtime will be used by all the stations in the program during the Syringe operation only. For

this example, set the runtime value to 02 minutes.

Note: The runtime setting in Syringe will not affect the actual runtime in the program.

4. Press Down

to navigate to the Program: field. Use the Input Dial to select the correct

program to syringe. For this example, select program 03.

5. Press Start

to activate or press Home to cancel and revert back to the default display.

Note: Pressing the Home Key will save the entered values.