Product Literature

GMM (Group Multi-Manual) Setting
Create Group Multi-Manual with two sequences. Sequence 1 will have stations 1, 5, 7 and 9 with a runtime of 15
minutes per station. Sequence 2 will have stations 2, 3, 4, 11, 12 and 13 with a runtime of 20 minutes per station.
The GMM will have two start times, one at 3 am and the other at 9 pm. GMM shall run only on Sundays, Tuesdays,
Thursdays and Saturdays.
GMM SMTWTFS 00:35:00
Set X-X-X-X Act days
Start: 01 03:00am
Seq# 01 00:15:00
St 01 05 07 09 -- --
Clear GMM: No
GMM
GMM SMTWTFS 00:35:00
Set X-X-X-X Act days
Start: 02 09:00pm
Seq# 02 00:20:00
St 02 03 04 11 12 13
Clear GMM: No
GMM
1. Press the Scheduled Watering Key . The cursor is initially located at the program selection field. Use the
Input Dial
to select GMM. GMM is located before P01 and after P64.
2. Press Down
to navigate to the Set: field. Press Left or Right to navigate to any weekday
you want to irrigate and use the Input Dial
to activate (X) or deactivate (–). Repeat to activate
additional irrigation days. Activate Sunday, Tuesday, Thursday and Saturday by setting (X) under their
corresponding initials.
3. Press Down
to navigate to the Start: field. GMM can be set with as many as 24 start times. Press Left
or Right to navigate to the Hours and Minutes fields and use the Input Dial to set the
proper start time. For this example, set start time 01 to 03:00am and start time 02 to 09:00pm.
4. Press Down
to navigate to the Seq# field. A sequence is a 6-station group with independent runtime.
GMM can have up to 32 independent sequences. While the sequence number is selected, use the Input Dial
to select the sequence number. Press Left or Right to navigate between the Hours
and Minutes field. Use the Input Dial
to set the desired runtime. Set sequence 01 with 00:15:00 of
runtime.
5. Press Down
to navigate to the Sta: field. Use the Input Dial to set the station number you
want to activate. Press Left
or Right to navigate between the station number fields. Set stations
01, 05, 07 and 09 to sequence 01.
Repeat steps 4 and 5 to set additional sequences. Set a 20-minute station runtime to sequence 02. Set
stations 02, 03, 04, 11, 12 and 13 to sequence 02.
Note: Lynx Smart Satellite will allow you to set a station that is already assigned to another sequence but it
will delete that station number from the sequence it was previously assigned.
6. To clear GMM, press Down
to navigate to the Clear GMM: field. Use the Input Dial to
select Yes, then press Up
to clear the parameters.
19