Product Literature

1. Press the Scheduled Watering Key . The cursor is initially located at the program selection field. Use the
Input Dial
to select the program (P01–P64) you want to create or modify. For this example, select
program 02.
2. Press Right to navigate to the percent adjustment field. Normally this setting will be 100% unless
weather or other condition suggest that less or more irrigation is needed. Use the Input Dial
to
adjust the setting. For this example, no adjustment is needed (remains at 100%).
3. Press Down
to navigate to the Hold: field. Use this option to suspend program operation. Select from
None, Today, 02–30 days or Permanent. For this example, select None.
4. Press Down
to navigate to the Days: field. Use the Input Dial to set the program activation
interval from 01–30 days. Select 01 for everyday, 02 for every other day, 03 for every third day and so on. The
example does not call for a set interval. Leave the Days: setting to SMTWTFS.
5. Press Down
to navigate to the Set: field. Use the Input Dial to select from any of the
preset intervals (All, Alternate days, Weekdays only, Weekends only, None or User set). To create your own
program activation interval, select Set:. Press Right
to select the day of the week you want to irrigate
and se the Input Dial
to activate (X) or deactivate (blank) the selection. For this example, activate
M (Monday), W (Wednesday) and F (Friday) only. MWF of the 1st and 2nd week should have an X mark under
while the rest are blank.
6. Press Down
to navigate to the Start: field. The first entry field will indicate the start time number. Each
program can have up to 24 start times. Use the Input Dial
to select the start time being created or
modified. Press Right
to navigate to the time entry field. Use the Input Dial to set the start
time in hours and minutes ( HH:MM). Repeat Step 6 for additional start times. For this example, set start time
01 to 05:45am.
7. Press Down
to navigate to the Syringe: field. Use the Input Dial to activate Syringe
by entering a syringe runtime. When activated, the program will run all stations for the specified duration
regardless of the stations’ runtimes. Leave the syringe runtime at 00 min.
8. Press Down
to navigate to the Repeats: field. Use the Input Dial to set the number of
times the schedule will be repeated after the first activation. Leave the Repeat value to 0.
9. Press Down
to navigate to the Soak: field. Use the Input Dial to set the soak time. The
soak time will indicate the delay before the program will repeat or cycle again. Leave the soak time blank (– – :
– – : – –) for no soak delay.
10. Press Down
to navigate to the Sta#: field. Use the Input Dial to select the value of the first
station being irrigated. For this example, select station 06.
11. Press Right
to navigate to the next station value. This value will indicate the last station of the range. If
irrigating only one station, this value should be the same as the first value. Use the Input Dial
to
set the range. For this example, select station 10.
12. Press Right
to navigate to the next entry field. This entry field will indicate the runtime in hours, minutes
and seconds ( HH:MM:SS). Use the Input Dial
and Right arrow to select the appropriate
runtime value. For this example, set the value to 00:15:00.
13. Press Down
to navigate to the Simult: field. Use the Input Dial to set the maximum number
of stations that can be activated simultaneously. For this example, set the value to 05.
17