Product Literature
SPECIFICATIONS
Operational
Lynx
®
Central:
- Mapping capabilities
- Remote hand-held operation
- Weather station integration
- Pump station integration
• Enhanced diagnostics:
- Communication
- Electrical shorts/opens
- Solenoid check
• No holding power required to operate stations
• Decoder identification is a unique 6-character address
Installation
• Maximum number of wire paths: 4 per gateway
• Maximum number of Lynx Smart Hubs: 20 per system
• Maximum number of modules per wire path: 250
• Maximum stations per Lynx Smart Hub: 1000
• Maximum stations per system: 10,000
• Simultaneous stations per output board: 100
•
Maximum distance from central to module (using 14 gauge wire): 2.8 miles
•
Maximum distance from module to sprinkler (using 14 gauge wire): 400 ft.
• Solenoids per output: 2 DCLS-P
• Stations per module: 1
Electrical
• Input power: 88-264 V ac, 50/60 Hz
• Output Power:
- Output voltage: 40 V ac max
- Output power: 75 VA max
- Class 2, SELV
• ISP 2-wire modules are rated at 20 KV surge protection
• 2-Wire modules wiring: 14 awg
Specifying Information—Gateway or Lynx Smart Hub
DEC-XXX-XXXX-XX
Type Configuration Cabinet Station Count Communication Type
DEC XXX X XXXX XX
DEC RS—Lynx Smart Hub WM Metal
P—Green Plastic Pedestal
B—Brown Plastic Pedestal
T—Tan Plastic Pedestal
1000—1000 Stations, Lynx Smart Hub* M—Wireline
DR—Radio
Example: A1000 station Lynx Smart Hub with green plastic pedestal and radio communication would be specified as: DEC-RSP-1000-DR
Note: A blank after RS indicates the wall mount cabinet. P, B, and T indicate green, brown, and tan plastic pedestals.
Specifying Information—2-Wire Modules
LSM-1
Type Configuration
LSM X
Lynx Smart Module 1—1-station
Example: A 1-station Lynx Smart Module would be specified as: LSM-1
*Refer to sprinkler pages for specifying information on Sprinkler 2-wire Modules
INTERFACE OPTIONS
Lynx Smart Hub
Lynx Smart Hub is a new type of
field controller that adds security,
programmability and sensing to
the benefits and simplicity of a
two-wire system.
The system can be segmented into manageable areas for
simplified maintenance
Provides for in-field manual operation or troubleshooting
Stores and runs a fully flow-managed irrigation schedule in
the event the central computer is oine
Creates a convenient point of connection for soil, flow and
status sensors
Lynx Smart Hub
Lynx
®
DEC-RS-1000-MFIU-2011DR
DEC-RSP-1000-DR
or
www.Toro.com
The Toro Company, Irrigation Division • 5825 Jasmine Street, Riverside, CA 92504 • 877-345-8676 • Specifications subject to change without notice • © 2019 All rights reserved • P/N 19-5097-IG