Manual

ManualsBrandsUnbranded ManualsField ControllersLynx® Smart Module 2-Wire Control System

Introduction

e Lynx Smart Module (LSM)

provides industry leading,

next generation control for

Toro Lynx 2-Wire systems.

Advanced Smart Guard™

lightning protection meets

the highest IEC standards for

irrigation controls. Installation

and maintenance are simplied

through use of the Toro barcode

app for iOS and Android

devices. Rapid two-way

communication and enhanced

diagnostics allow you to quickly conrm that your system is

operational. e LSM is compatible with all INFINITY and

Flex800 golf sprinklers and P220 and 220G golf valves as

well as 100% backwards compatible with 2006-2017 GDC

systems using GDC modules DEC-ISP-1, DEC-ISP-2 or

DEC-ISP-4.

Specifications

Model Number LSM-1 or LSM-1GB

Dimensions 4” x 3” x 1.5”

Weight 0.5 lb

Address 6 character, alpha-numeric

Input Voltage 40 VAC nominal

Input Current 0.00014 amps nominal

Surge Resistance 20KV, 10KA per IEC 61000-4-5

Solenoid Compatibility Toro 102-2709 or DCLS-P

Input wiring 16 AWG, solid core

Approvals FCC, cUL, CE, TUV, RCM

Lynx Smart Module

Design Guide

1. Central (Toro PC with Lynx Software)

2. Field Interface Unit (FIU)

3. Connection via wire or radio

4. Lynx Smart Hub(s), up to 20

5. 2-wire cable, up to 4 per hub

6. LSM equipped sprinkler or valve (Innity, Flex 800, P220),

up to 250 per cable

7. Ground points

8. Isolation switches or devices

– +

HOME

%ADJUST START PAUSE/

RESUME

STOP SYSTEM

SETTINGS

MANUAL

WATERING

SCHEDULED

WATERING

DIAGNOSTICS STATION

SETTINGS

– +

HOME

%ADJUST START PAUSE/

RESUME

STOP SYSTEM

SETTINGS

MANUAL

WATERING

SCHEDULED

WATERING

DIAGNOSTICS STATION

SETTINGS

System Components

Summary of content (4 pages)

PAGE 1
Lynx Smart Module Design Guide Introduction Specifications The Lynx Smart Module (LSM) provides industry leading, next generation control for Toro Lynx 2-Wire systems. Advanced Smart Guard™ lightning protection meets the highest IEC standards for irrigation controls. Installation and maintenance are simplified through use of the Toro barcode app for iOS and Android devices. Rapid two-way communication and enhanced diagnostics allow you to quickly confirm that your system is operational.
PAGE 2
The Details Capacity Lynx Smart Hubs per system Modules per Lynx Smart Hub Daughter boards per Lynx Smart Hub Wire paths per daughter board Modules per wire path Simultaneous solenoids per wire path Wire Sizing Sleep current Active current Average current Maximum design voltage drop 20 1000 2 2 250 50 main cable 3750’ To optimize the advanced diagnostic features, the station numbering should follow the wire, with the lowest station numbers closest to the Lynx Smart Hub and t
PAGE 3
As a best practice, Toro recommends that all ground and surge devices be checked annually and/or after a significant lightning event. All other electrical equipment grounds must meet local electrical codes. Toro advises against the use of a bonding/shielding wire to protect the Toro components of Toro control systems.
PAGE 4
Specifications • Up to 1000 stations per Lynx Smart Hub • Each Smart Hub has two daughter boards • Each daughter board can have two wire paths with up to 250 decoder modules each • Each system can have up to 20 Lynx Smart Hubs Wired Communication • Uses standard satellite type communication cable (Paige P7162D) to connect FIU to Lynx Smart Hubs • Communication cable can be up to 50,000 feet Wireless Communication • Uses UHF data radio in the FIU and the Lynx Smart Hub • RF output power – 2.