Full Product Manual
Use these 4 screws for installation of the
fan over the water tank. 2 are for the
front and 2 are for the back
like packing foam and straighten the water pump hose. Place the water pump
with its hose inside the water tank. Carefully li the fan and place it one the
Step 4: Unbox the water reservoir and place it over the base. Line up the holes
in the base and reservoir. You will need the pieces from the plasc bag:
Step 5: Remove the nut and washer from the bolt on the stopper. Insert the
bolt into the hole in the base, put the washer and the screw nut on the bolt
from the boom.