User Manual

7
Sof
SofSof
Software Installation/Setup
tware Installation/Setuptware Installation/Setup
tware Installation/Setup
Hardware Driver
Hardware DriverHardware Driver
Hardware Driver
Your Lumenier LUX
LUXLUX
LUX has a Micro-USB connector. Hold the “boot” button while plugging in for the
first time. The LUX has two modes. It switches to “DFU” mode while the “boot” button is pressed
as it is plugged in.
Windows users:
Windows users:Windows users:
Windows users:
• Download Zadig from http://zadig.akeo.ie
• Open Zadig, choose Options > List All Devices
• Select STM32 Bootloader, WinUSB
• Click “replace driver” or “install driver”
Mac
MacMac
Mac/Linux
/Linux/Linux
/Linux users:
users: users:
users:
Driver will install automatically
Cleanflight Configurator
Cleanflight ConfiguratorCleanflight Configurator
Cleanflight Configurator
Cleanflight Configurator from the Google Web Store will be used to configure your Lumenier LUX
LUXLUX
LUX
board.
• Download:
http://chrome.google.com/webstore
Alternative
Alternative Alternative
Alternative Firmware Upgrade
Firmware UpgradeFirmware Upgrade
Firmware Upgrade
Should Cleanflight Configurator stop working with your device, or your device becomes corrupted,
you can restore LUX
LUXLUX
LUX to factory defaults with a standalone utility.
Windows users:
Windows users:Windows users:
Windows users:
Firmware upgrade utility -
http://bit.do/LUXDfuSe
Use drivers from Windows Update
Mac & Linux:
Mac & Linux:Mac & Linux:
Mac & Linux:
• “DFU Util” “dfu-util” from the command line.