User Manual

6
Connect LED Strip
Connect LED StripConnect LED Strip
Connect LED Strip
You can connect an addressable LED strip (WS2812B) to the LUX
LUXLUX
LUX flight controller. Connect your
LED strip to pins labeled LED
LEDLED
LED.
Enable feature in CLI: feature LED_STRIP
feature LED_STRIPfeature LED_STRIP
feature LED_STRIP
Connect
Connect Connect
Connect Battery (
Battery (Battery (
Battery (Main Power connection)
Main Power connection)Main Power connection)
Main Power connection)
Your LUX
LUXLUX
LUX flight controller has input voltage 6-26v (2-6S lipo). Connect main power lead to pins
labeled 10
1010
10.

Always check the polarity before plugging in. There is no reverse polarity protection.
Enable feature in CLI: feature VBAT
feature VBATfeature VBAT
feature VBAT
Connect Current Sensor
Connect Current SensorConnect Current Sensor
Connect Current Sensor
Connect a current sensor signal wire to the pin labeled 9
99
9, and corresponding GND wire.
Enable feature in CLI: feature CURRENT_METER
feature CURRENT_METERfeature CURRENT_METER
feature CURRENT_METER
current_meter_type 1
current_meter_type 1current_meter_type 1
current_meter_type 1
Connect
ConnectConnect
Connect OSD (On Screen Display)
OSD (On Screen Display)OSD (On Screen Display)
OSD (On Screen Display)
You can connect a compatible OSD to your
LUX
LUXLUX
LUX
flight controller. Connect the corresponding TX
TX TX
TX
and RX
RXRX
RX pins to USART1 labeled T1/R1
T1/R1T1/R1
T1/R1.

For MWOSD, remember to change Voltage/Amperage/RSSI to “Use FC”.
“Use FC”.“Use FC”.
“Use FC”.
Connect RSSI
Connect RSSIConnect RSSI
Connect RSSI
Connect RSSI pin from your receiver to LUX
LUXLUX
LUX pin RSSI
RSSIRSSI
RSSI
Connect GPS
Connect GPSConnect GPS
Connect GPS
GPS features in Cleanflight are experimental. Please share your findings with the developers. GPS
works best if the GPS receiver is mounted above and away from other sources of interference.
Connect GPS TX/RX/5v/GND pins to corresponding TX
TXTX
TX and RX
RXRX
RX pins (TX to RX, RX to TX).
Enable feature in CLI: feature GPS
feature GPSfeature GPS
feature GPS
set gps_provider = 0 (nmea only)
set gps_provider = 0 (nmea only)set gps_provider = 0 (nmea only)
set gps_provider = 0 (nmea only)
set gps_provider = 1 (UBLOX only)
set gps_provider = 1 (UBLOX only)set gps_provider = 1 (UBLOX only)
set gps_provider = 1 (UBLOX only)