Installation Guide

7 .
Care and Cleaning
□ Clean the fixture with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents or hash abrasives.
CAUTION: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the breaker off
or removing the fuse from the fuse box.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not illuminate.
□ The bulb is burned
out.
□ Replace the light bulb.
□ The power is off.
□ Ensure the power supply is On.
□ The circuit breaker is
off.
□ Ensure the circuit breaker is in the On
position.
The fuse blows or circuit breaker
trips when the light is turned on.
□ The wires are crossed
or the power wire is
grounding out.
□ Check the wire connections.