Installation Guide

5 .
Installation
1
Attaching the cross bar to the
outlet box
2
Connecting the electrical wires
□ Screw the mounting screws (DD) into the cross bar (AA).
□ Mount the cross bar (AA) to the outlet box (not
included) using the two outlet box screws (CC).
□ Make sure the threads of the mounting screws (DD)
are facing out when the cross bar (AA) is attached to
the outlet box.
□ Wrap the ground wire from the fixture around the
ground screw (BB) on the cross bar (AA). Use a
wire connector (EE) to connect the ground wire
from the fixture to the ground wire from the outlet
box.
□ Use a wire connector (EE) to connect the white
wire from the fixture to the white wire (neutral
wire) from the outlet box.
□ Use a wire connector (EE) to connect the black
wire from the fixture to the black wire (live wire)
from the outlet box.
□ Wrap the three wire connections with electrical
tape for a more secure connection.
□ Position the wires back inside the outlet box.