Item #1002 513 560 Model #LT1000 Model #JIB8411A/BN LUMINOSA Item #1002 513 569 Model #LT1001 Model #JIB8411A/ORB USE AND CARE GUIDE 1-LIGHT INTERIOR SCONCE Questions, problems, missing parts? Please consult your local The Home Depot store or email Customer Service scott_w_morris@bellsouth.net 8 a.m. - 5 p.m.
Table of Contents Tools Required ............................................ 3 Hardware Required ...................................... 3 Package Contents ....................................... 4 Installation ........................................... 5 Care and Cleaning ............................... 7 Troubleshooting .................................. 7 Table of Contents ................................. 2 Safety Information ................................ 2 Warranty ................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase. NOTE: This fixture can be installed as an up-light or a down-light.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity A Socket Ring 1 B Shade 1 C Socket 1 D Lock Nut 2 E Wall Plate 1 4
Installation 1 2 Attaching the cross bar to the outlet box □ Screw the mounting screws (DD) into the cross bar (AA). □ Mount the cross bar (AA) to the outlet box (not included) using the two outlet box screws (CC). □ Make sure the threads of the mounting screws (DD) are facing out when the cross bar (AA) is attached to the outlet box. 5 Connecting the electrical wires □ Wrap the ground wire from the fixture around the ground screw (BB) on the cross bar (AA).
Installation (continued) 3 4 Securing the fixture to the outlet box □ Align the mounting screws (DD) so that they protrude through the appropriate holes on the wall plate (E). □ Screw the lock nuts (D) onto the mounting screws (DD) to secure the fixture. NOTE: This fixture can be installed as an up-light or a downlight. 5 Installing the bulb □ Screw the bulb (sold separately) (60 watts maximum) into the socket (C).
Care and Cleaning □ □ Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents or hash abrasives. CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Troubleshooting Problem The bulb will not illuminate. Possible Cause Solution □ The bulb is burned □ Replace the light bulb. □ The power is off. □ Ensure the power supply is On.
Questions, problems, missing parts? Please consult your local The Home Depot store or email Customer Service scott_w_morris@bellsouth.net 8 a.m. - 5 p.m., EST, Monday - Friday Retain this manual for future use.
Artículo #1002 513 560 Modelo #LT1000 Modelo #JIB8411A/BN LUMINOSA Artículo #1002 513 569 Modelo #LT1001 Modelo #JIB8411A/ORB U GUÍA DE USO Y MANTENIMIENTO APLIQUE DE PARED PARA INTERIORES DE 1-LUZ Preguntas, problemas o piezas faltantes? Por favor, consulte a su tienda local The Home Depot o envíe un correo electrónico al Servicio de Atención al Cliente (scott_w_morris@bellsouth.
Índice Herraminentas Necesarias ......................... 11 Requiere de Hardware ............................... 11 Contenido del Paquete .............................. 12 Instalación ..........................................13 Mantenimiento y Limpieza .................15 Solución de Problemas ......................15 Índice .................................................. 10 Información de Seguridad ................. 10 Garantía .............................................. 10 Lo que esta Cubierto ..
Pre-Instalación PLANIFICACIÓN DE LA INSTALLATIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad A Aro del Portalámpara 1 B Pantalla 1 C Portalámpara 1 D Tuerca de Cierre 2 E Placa de la Pared 1 12
Instalación 1 2 Acoplar la barra cruzada a la caja de salida □ Atornille los tornillos de montaje (DD) en la barra cruzada (AA). □ Monte la barra cruzada (AA) en la caja de salida (no incluida) usando los dos tornillos de la caja de salida (CC). □ Asegúrese de que las roscas de los tornillos de montaje (DD) están hacia afuera cuando la barra cruzada (AA) esté unida a la caja de salida.
Instalación (continuación) 3 4 Asegurar el accesorio a la caja de salida □ Alinee los tornillos de montaje (DD) de modo que sobresalgan de los agujeros apropiados de la cubierta para placa de la pared (E). □ Atornille las tuercas de cierre (D) sobre los tornillos de montaje (DD) para asegurar el accesorio. NOTA: Este accesorio puede ser instalado como una luz hacia arriba o hacia abajo.
Mantenimiento y Limpieza □ □ Limpia la lámpara con un paño suave y seco. No uses limpiadores con químicos, solvents, o productos abrasivos. PRECAUCIÓN: Antes de intentar limpiar la pieza, desconéctela o apague el interruptor o remueva el fusible de la caja de fusibles. Solución de Problemas Problema Causa Posible Solución La bombilla no se iluminará. La bombilla está fundida. Reemplaza la bombilla. La electricidad está apagada. Asegúrate de que el suministro de electricidad esté encendido.
Preguntas, problemas o piezas faltantes? Por favor, consulte a su tienda local The Home Depot o envíe un correo electrónico al Servicio de Atención al Cliente (scott_w_morris@bellsouth.net) de lunes a viernes, de 8 de la mañana a 5 de la tarde (hora oficial del este) Conserva este manual para referencias futuras.