Warranty

Care and Maintenance Instructions
 Cleaning the Filter Cartridge
1. Disconnect power
2. Remove the filter cover
3. Unthread the Filter Cartridge counterclockwise
4. Rinse dirt and debris away thoroughly with a garden hose
5. Replace filter cartridge and cover
6. Reconnect power
 Water Chemistry
Read and understand the spa chemistry guidelines supplied by your dealer or local chemical
supplier. There are many solutions available to balance your water chemistry. If you are unfamiliar
with water chemistry, your best option is to work with your dealer or your local chemical supplier.
It is unhealthy to use your spa when the water is not in proper chemical balance.
Warning:
Do not use Calcium Hypochlorites, Trichlors or Bromine. Doing so may cause corrosion to your
pump and possibly fade your spa surface. This will not be covered under the warranty.
 Minimum Weekly Maintenance
1. Test water for chlorine and pH
2. Adjust pH to 7.2-7.8
3. Adjust chlorine to 1-3ppm
 Vinyl Covers
1. Soft top covers are composed of a vinyl skin and high-density foam insert. They have straps
and two-part clips which are attached to the spa.
2. The vinyl surface can be cared for with any mild household cleanser or products made for
the care and maintenance of vinyl products.
 Cleaning Your Zen Hot Tubs
1. The filter should be cleaned every 3-6 months with your garden hose. You may also choose
to use a filter cleaner. Follow the directions provided with the cleaner.
2. If the shell gets dirty, you can simply use pressurized water to clean the majority of the dirt.
In some cases, you may need to use a mild soap and water solution. In this instance, you will
need to thoroughly rinse the spa. If not, you will have an issue with bubbles.
3. Refill spa with fresh water to the recommended level. The water line should cover all the
upper jets in the spa. If you encounter an air lock, refer to the “Relieving Air Locks” section
above.