Warranty

HOTSPOT METHOD
Step 1: Go to your App Store find and install The Level
Sense App or go to www.Level-Sense.com/account/login
Create your account by clicking at New Portal & Account
Step 2: Plug in the power supply provided into any AC outlet
and the other end into the device. White Cloud LED is
pulsing. Note: You may Skip to WPS METHOD in case your router supports this
feature.
Step 3: Turn your smartphone/tablet Wi-Fi ON, disable your cellular data, find and
join Level-Sense_.... SSID. Open the network and new page “Welcome to Level
Sense” will show up. Find and click the bullet point across your 2.4GHz SSID >>>
CONGRATULATIONS on your most recent and useful purchase!
Your purchase is the greatest compliment we can get, and we keep on
working to maintain your trust in Level Sense.
Our product is our promise. And now let us walk you through this
Q U I C K S T A R T G U I D E
>>> (Click bullet point Manual and enter your SSID across
if your SSID is not broadcasted), enter your correct SSID,
correct password ( Tip: Creating and connecting Level
Sense Sentry to a guest Wi -Fi access point network is
advisory due to Level Sense password limitations (8 -48
charact ers and no special characters as !@#$%^&*()
supported). This way you can still use Level Sense Sentry
without sacrificing the security of your personal
network) and correct email (associated with the account
created in Step 1). Click Submit . Screen Wi -Fi
Configuration Saved and Sentry’s LED Off as a
confirmation of response. If correct email was used and
all SSID credentials were rightfully entered, then
Congratulations! Your LS Sentry has been claimed and
you can skip Step 4.
Step 4: Press the Reset button once. Yellow Cloud LED is going to be pulsing for
6sec. and then all four lights (Power, Cloud, Claim and Alarm) should pulsing
simultaneously with same or different colors. This is your unique “Claim Code”.
Go to your App or www.Level -Sense.com/account and click on Claim device .
Enter your colors and click Claim device at the bottom. Note: Color -blind
people need assistance. Congratulations! Your LS Sentry has been claimed.
ATTENTION: In case your credentials were wrong then red Cloud light will be
blinking. If that happens then press and hold Silence button for ~6 sec. until all
two more times until only two red LED’s are still ON and wait until all LED’s go
four lights shine red, then click Silence two more times
until only two red LED’s are still ON and wait until all LED’s
go OFF (~11sec.) Click Reset once and return to Step 3 .
WPS METHOD
Step 1: Press the WPS button on your router. Wait 15 sec.
Step 2 : Press the Level Sense Sentry Silence button twice.
The Cloud LED will turn from pulsing white to solid yellow.
The WPS method may take up to 3 min. Upon successful
connection all four lights will turn Off.
Step 3: Go to Step 4
Note: Extended manual and support are available at our
website www.Level -Sense.com and customer support.