Instructions / Assembly

11
Connect Step 10 Assembled parts to
another Side Panel A, secure with 2
Screw E.
12
Attach the Basketball Ring with 2
Screw A, Peg with 2 Screw E,
Telescope, then paste Stickers.
Assembly completed!
Connect Step 11 Assembled parts to Step
9 Assembled parts, secure with 4 Screw E.
13
14
15
Connect the Bus Front and Panel C to the
Side Panel E, secure with 3 Screw E each
side. Then connect the 2 Rearview Mirror to
the Side Panel E with 2 Screw A.
Connect the Bus section to the Slide section
with 4 Screw E. Instead of putting the two
sections together before installing the
Screw, please insert Screw E through the
hole on Side Panel B first, and then attach
Bus Side Panel E, then tighten the screw.
4
Due to limited space around the screw
hole, Screw E should be inserted at a
specific angle.