Instructions / Assembly

ASSEMBLY
Step1
Attach the Slide to the Buffer Board, and secure
with Screw A on the back.
Step2
Connect the Handrails together with Long Square
Screw E, and then attach the long handrail to
Slide, secure with 9pcs Nut G on each side, 18pcs
Nut G in total. Tighten with Plastic Screwdriver.
Step3
Connect the Slide section previously assembled
to the Large Side Panel, securing them with 1pc
Nut C, 1pc Square Screw D and 1pc Nut F,
using Plastic Screwdriver.
Step4
Take 2 Tower Gates, insert them through the
holes on the Large Side Panel, and secure
with 2pcs Nut C.
Step5
Connect the Round Hole Panel and Small Platform
with 2pcs Nut C. Then attach this part to the slide
section, secure with 3pcs Nut C.
Screw A x 1
Long Square Screw E x 2
Nut G x 18
Plastic
Screwdriver
Nut C x 1
Nut F x 1
Square Screw D x 1
Nut C x 2
Nut C x 5
2