Instructions / Assembly

Finished Height
Frost Depth
Post Length
10" Excavated Hole
W/Concrete Fill
In-Ground Post
Instrument Assembly
RECYCLED AND STEEL POST IN-GROUND INSTALLATION PROCEDURES
Step 1: Excavate one 10" diameter hole, 36" deep at the installation location.
Contractor can modify post to desired height.
Post Length = Frost Depth (36" Recommended) + Finished Height
Finished Height Guideline: ( Ages 3-5, 18" ) ( Ages 5-7, 23" ) ( Ages 7-11, 28" ) ( Adult, 32" )
Step 2: Lower the post into the excavated hole.
Step 3: Verify the correct placement, levelness, plumbness, and finished height
of the instrument. Also check for sufficient clearance around the instrument.
A 36" radius is recommended around the instrument for wheelchair accessibility,
however this is not required for instrument function. Instrument may be installed
next to a wall or in a variety of different configurations.
Step 4: Last pour concrete around the post. It is recommended to brace the instrument
to hold it rigid while the concrete cures. Leave to set according to the concrete
manufacturers guidelines. Approximately (2) 80lb. bags will be needed.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
WWW.FREENOTESHARMONYPARK.COM
SHEET 4 OF 5
Lilypad Cymbals 2017 - Installation Guide
SCALE: 1:12 REVISION: A