LINK-MICRO-LTE QUICKSTART GUIDE v.1.
ENGLISH In the box 1x LINK-MICRO-LTE camera 1x Antenna holder 1x Installation strap 1x Quickstart guide 1x SIM card that is preactivated and inserted in the camera NOTE: Memory card and batteries are sold separately. User manual, latest firmware, and FAQ available at: support.spypoint.
5 ENGLISH 4 1 6 2 7 3 8 9 10 11 12 13 14 16 15 17 3
ENGLISH Getting started SELECT A POWER SOURCE • Lithium or alkaline AA batteries • 12V rechargeable battery (#KIT-12V) • 3.7V rechargeable battery pack (#LIT-10) NOTE: We recommend using the SPYPOINT #LIT-10 rechargeable lithium battery pack, sold separately. FOR BEST RESULTS AND NO LEAKAGE: • Use only new lithium or alkaline batteries. • Do not mix old and new batteries. • Do not use rechargeable AA batteries (their lower voltage can generate operational issues).
You must activate your camera through the free "SPYPOINT app" or by logging on to the SPYPOINT.COM website. ENGLISH ACTIVATING YOUR CAMERA FINDING THE ACTIVATION CODE The activation code is located inside the camera's battery compartment behind the battery holder. You will need this unique code to activate the LINK-MICRO-LTE. SPYPOINT APP Follow these steps: 1. On Google PlayTM or the App StoreTM, search for "SPYPOINT app". 2. Download and install the app on your smartphone or tablet. 3. Start the app.
ENGLISH ACTIVATING YOUR CAMERA SPYPOINT website Follow these steps: 1. On the SPYPOINT website, select "LOGIN" in the top navigation menu. On the displayed page, select "Register," fill out the required fields, then log in. 2. Select the + sign on the far right of the page; in the list, select "LINK-MICRO-LTE," then follow the steps. 3. When complete, a confirmation email will be sent to you with instructions on how to finalize the creation of your account will be sent to you. 4.
ENGLISH CONFIGURING YOUR CAMERA Both the SPYPOINT app and website let you configure all the camera settings remotely. They also provide basic information on your camera – such as: cellular signal strength, battery level, and MicroSD card space used. This information is based upon the latest connection with your camera. New settings take effect every time the camera connects with the SPYPOINT app or website. Below are the most basic settings you will configure.
ENGLISH STARTING YOUR CAMERA 1. Turn on the camera. 2. The green "STATUS" light will flash while searching for a -- signal (can take a few minutes). 3. The "STATUS" light will light up in one of the following 3 colors: 4. 5. 6. Red: Orange: Green: Insufficient signal. Acceptable signal. Optimal signal. When the top right light flashes red, 30 seconds remain before the photo mode is turned on. This allows you to leave the area without being photographed.
ENGLISH DISPOSAL ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES. If one day your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
ENGLISH FCC THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions: 1. This device must not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For a complete list of specifications, features, and settings, visit our LINK-MICRO-LTE page at www.spypoint.com. THANK YOU FOR CHOOSING FAQ, user manual & latest firmware available at: SUPPORT.SPYPOINT.
