Installation Guide

BASE
As per your choice, you may receive a greenhouse with or without a
pre-fabricated base kit. Either way, this greenhouse must be secured
to a firm base.
The Base must be level and square.
Before assembling the greenhouse, you must prepare a proper founda-
tion. Two foundation options are provided in this manual. The con-
crete foundation option is recommended for a stronger installation.
SITE SELECTION
The greenhouse should be placed in an area that receives direct sun-
light and gets shielded from wind.
The surface must be level.
ABOUT THIS MANUAL
LEGENDS
Steps. Follow the steps in alphabetic order, from Step A to Step B,
1111etc.
Part No. Each part is labeled with its Part No.
BOLT INSERTION
Several steps in this manual invlove inserting F4 Bolts into the groove
of Aluminum profiles as a preparation for further installation. Dia-
grams above illustrate how to use such inserted bolts.
F4 BOLTS AND NUTS
Part No. F4 refers to both the bolt and the nut. In some steps only the
bolt or the nut will be used and in other steps the whole set will be
used. Check the specific Part List in each step.
SEALING
Sealing the greenhouse by applying glue or tapes between the polyca-
bonate sheets and aluminum profiles will keep insects out and provide
better stability against wind.
Sealant and glue gun are not included.
PARTS
Identify all parts using the parts list on next page and labels on the
parts.
Layout each part needed for a step before working on that step.
MAINTENANCE
Inspect the greenhouse periodically.
When the greenhouse needs cleaning, use a gentle detergent.
03
Please contact seller on your
account for help if have any
problem when assemble or miss
something, we will try our best to
help you solve the issue.